Tripod adapters are one of the most commonly used accessories for binoculars. It is also referred to as binocular tripod mount.
The below article provides a detailed description of the 5 best binocular tripod adapters available in the market today.
- 1 Why is a tripod adapter required for binoculars?
- 2 What are the important features of binocular tripod adapters?
- 3 What are the different types of binocular tripod adapters?
- 4 How to choose the right tripod adapter for your binoculars?
- 5 Which are the Best Binocular Tripod Adapters available in the market today?
- 6 Nikon Binocular Tripod Adapter (Action and Marine Series)
- 7 Vanguard BA-185 tripod adapter
- 8 Bushnell Binocular Tripod Adaptor
- 9 Zeiss Universal Binofix Tripod Adapter
- 10 Nikon Binocular Tripod Adapter
- 11 Comparison of the Best Binocular Tripod Adapter
- 12 Conclusion
Why is a tripod adapter required for binoculars?
One of the most important uses of a tripod adapter is to get a steady image. As high end binoculars that offer high magnification will amplify even small movements, a tripod adapter is a must for people with shaky hands.
Binocular tripod adapters are also beneficial for scanning wide open areas for a long duration. This not only eases the burden on your hands but also makes it easier to focus on the subject.
Tripod adapters for binoculars are especially useful for people who have a keen interest in astronomy, hunting and wildlife photography.
What are the important features of binocular tripod adapters?
Most of the tripod adapters for binoculars are fitted with standard fittings that have a threaded screw which is at least quarter of an inch. It is fitted in the front of the binoculars’ hinge. The other end of the adapter is fitted with a common thread size screw which is used for the tripod head.
In order to fix the tripod adapter to the binocular, you will have to remove the plastic plug and screw it in front of the binocular.
Most compact binoculars are not tripod adaptable. Therefore you will have to buy additional parts that will allow the binocular to be mounted on a tripod.
What are the different types of binocular tripod adapters?
There are 3 types of binocular tripod adapters.
Screw thread binocular tripod adapters
These are the most commonly used type of binocular tripod adapters. The tripod mount is most often located on the rear end of a covering cap which is on the central pivoting system.
In order to fix the adapter, you will have to remove the screws of the covering cap. Once done use screws to attach the adapter and finally mount it on your tripod.
You must choose the thread screw that fits your binoculars well not all screw threads work on all binoculars.
Central shaft adapters
This is another variant of tripod adapters. This type of adapter is fixed to the binoculars on the central shaft.
Central shaft adapters are usually used for binoculars that are equipped with Porro prisms.
Universal Binocular Tripod Adapter
There are a few binoculars that are not fitted with a thread or central shaft. For such type of binoculars you can use the universal binocular tripod adapters.
This type of tripod adapters uses strap to fix the binocular onto the adapter. Once done it is then mounted on a tripod.
How to choose the right tripod adapter for your binoculars?
As mentioned above, not all screw thread adapters are the same. Therefore in order to prevent in issues, it is advisable to buy adapters that are of the same make as the binoculars.
Choosing the right tripod adapter is mostly dependent on the size of the nut which is used to screw the adapter onto the binoculars.
If your binoculars are equipped with Porro prisms then you will have a number of options to choose from. This is because there is adequate space between the barrels to allow even the thickest or widest adapters.
If your binoculars are fitted with roof prisms then you must choose an adapter that is very slender. This is because the barrels in such binoculars are fitted quite closely and hence there is much less room for the adapter to fit in compared to Porro prism binoculars.
You must ideally choose an adapter that is made of metal in order to avoid any vibrations that is commonly associated with plastic adapters.
Another factor to consider is the stud that joins the binocular to the adapter. This stud must be fitted with a knob. This will provide the user with more ease to maneuver in the restricted space between the barrels.
Which are the Best Binocular Tripod Adapters available in the market today?
There are a number of binocular tripod adapters available in the market. Users must carefully understand their requirement and choose an adapter that fits best.
Below is a list of some of the best binocular tripod adapters.
Nikon Binocular Tripod Adapter (Action and Marine Series)
Nikon are a well known brand and hence the customers can be rest assured of the quality of the binocular tripod adapters. Nikon manufactures a range of tripod adapters that fit well with binoculars manufactured by them or by other brands.
The Nikon binocular tripod adapter (action and marine series) is compatible with their Action, Aculon, and Action Extreme & Marine Series Binoculars. The adapter can mount any of the Nikon E2, Zoom XL and Superior E binoculars comfortably on the tripod.
The tripod adapter can be easily fitted using the front screws that are responsible for holding the barrels together.
The adapter is L shaped and this is a screw thread binocular adapter. The screw is fitted with a large head that makes it comfortable for users to handle even during the night.
The customers are happy with the functionality of the product. They find it very user friendly as it is easy to install, fine tune and mount it on the tripod.
The price point of the product is a concern as it priced on the higher side. The dimensions of the product are 3.1 x 2.1 x 1.7 inches. The product weighs 3.2 ounces. The customers have given the product an average rating of 4.1 out of a possible 5.
Vanguard BA-185 tripod adapter
You can easily mount your binoculars on the Vanguard BA-185 tripod adapter and enjoy the stable view. The tripod adapter is compatible with both Porro prism and roof prism binoculars manufactured by Vanguard and other brands too.
As the adapter is made of aluminum it is very strong. But as it is made of metal it is heavier than other tripod adapters.
The adapter is designed with a drilled hole. This is where the location pin has to be screwed on top of the tripod head. This prevents the adapter from swiveling when it is in use.
This is a screw thread binocular adapter. It is fitted with a long finger knob that makes it easy to tighten the adapter. The device rests on a rubber pad that not only acts as a protection but also secure the instrument firmly in place.
Customers are very happy with the overall design and quality of the product. The price point is another attractive feature as it is reasonable priced.
If you are looking for a tripod adapter that provides steady, relaxed and takes the load off your hands then you take a look at Vanguard BA-185 tripod adapter
The dimensions of the product after packaging are 5.8 x 5.0 x 0.7 inches. The product weighs 3.2 ounces. The customers have given the product an average rating of 4.7 out of a possible 5.
Bushnell Binocular Tripod Adaptor
Bushnell has been a market leader and one of the pioneers in the field of sport optics. The products are of high quality, reliable and moderately priced.
By mounting your binoculars on this tripod adapter you will be able to view the fast paced action on the field or enjoy the sight of the clear the night sky very closely.
This excellent tripod adaptor from Bushnell should be a standard accessory for your binoculars. It is ideally suited for binoculars that offer high magnification in the range of 10X.
People who are interested in bird watching and star gazing will find this binocular tripod very beneficial.
It is secured in a clamshell packaging and the black matte finish suits the overall design of many binoculars. This is a screw thread binocular adapter.
The dimensions of the product are 3 x 1 x 4.8 inches. The product weighs 2.6 ounces. The customers have given the product an average rating of 3.6 out of a possible 5.
Though the customers are happy with the quality of the product they are unhappy that the mounting threads do not fit with the binoculars easily. Also the 1/4″ 20 thread screw is not part of the package.
There are many duplicate products flooding the market. Therefore it is better to purchase it from a reliable vendor.
Zeiss Universal Binofix Tripod Adapter
This is a universal binocular adapter. It works well with almost all binoculars but is especially suited for Victory FL 7×42, 8×42 and 10×42 binoculars manufactured by Zeiss.
The binocular is mounted on the curved base of the adapter. The adapter is fitted with an anti skid surface just where the barrels of the binoculars are fixed. It has a tensioning strap that can be adjusted easily.
It is highly recommended for binoculars that are not equipped with 1/4″-20 mount hole in the hinge. It can also be used for 3/8″-16 threaded tripod screws.
It is strong, durable and has a tight grip. It is suitable for both large and small binoculars. The tripod adapter is compatible with both Porro prism and roof prism binoculars. It can accommodate binoculars that have a lens diameter of 30mm.
The tripod stalk is offset on purpose so that it does not interfere with your line of sight. The dimensions of the product when packed are 6.2″ x 4.6″ x 3.9″. The product weighs 9.8 ounces.
The high price and weight of the product is a cause of concern for the users. The customers have given the product an average rating of 3 out of a possible 5.
Nikon Binocular Tripod Adapter
This is a center shaft binocular adapter. The star attraction of this tripod is that it weighs a mere 0.42 pounds. It is ideal to be used with Nikon E2, Astronomy series, Superior E, or Zoom XL binocular.
It can also be used with any binocular that has a central shaft diameter measuring up to 14 millimeters. It can be used with any tripod head with a 1/4″-20 threaded screw.
If you are looking for a tripod adapter that is stable even in high winds then the Nikon Binocular Tripod Adapter will be a perfect choice.
The metal bracket and the curled knob are of top quality. Even though it is expensive, people are willing to pay the price due to its superior design.
People who have used the tripod adapter have found it to be very well balanced. The dimensions of the product are 5 x 5 x 5 inches. The customers have given the product an average rating of 5 out of 5.
Comparison of the Best Binocular Tripod Adapter
The below table provides a brief summary of the features of the different binocular tripod adapters discussed in the article. This will help you to make an informed decision.
|Model||Specifications||Weight||Price||Average customer rating|
|Nikon 76560 Binocular Tripod Adapter
|3.1 x 2.1 x 1.7 inches||3.2 ounces||$24.93||4.1|
|Vanguard BA-185 tripod adapter||5.8 x 5.0 x 0.7 inches
|Bushnell Binocular Tripod Adaptor
|3 x 1 x 4.8 inches||2.6 ounces||$17.76
|Zeiss Universal Binofix Tripod Adapter
|6.2 x 4.6 x 3.9 inches
|Nikon Binocular Tripod Adapter
|5 x 5 x 5 inches||7 ounces||$69.99||5|
Due to the many options available in the market, it is possible to get overwhelmed. But by understanding your requirements and doing a fair amount of research, it is possible to find the best tripod adapter that works well with your binocular.
Based on the customer reviews, the Nikon Binocular Tripod Adapter is by far the best binocular tripod adapter. The sleek design and robust construction gives it an edge over the other tripod adapter.
After you have used this sturdy tripod adapter for your binoculars and experienced the impeccable view and the great level of detail of the images, you will definitely be sold on it.